The World´s Only Thin Kerf, Low Tensioned, Swedish Silicon Steel 1″, 1 1/4″, 1 1/2″ and 2″ Band Saw Blades.

We produce low-tension, Swedish silicon steel and cobalt blades from 1- to 2 inches wide for many applications. We are the only company that mills and induction hardens the teeth in every blade we make. Our blades are used on everything from the smallest to the largest band mills and resaws.

* Our New 1-1/2″ x .052 thick blades are designed to run on both small and large band mills, headrigs and high production resaws, such as the Wood-Mizer LT40, LT70 and LT300, Baker 36 Series, LogMaster, Accu-Trac, S & W and vertical Amish mills. The blades thickness allows for tremendous stability and overall life in all applications. This is the most productive blade you will ever use.

* Our New 1-3/4″ x .052 thick blades are specially designed to run on large band mills, headrigs and high production resaws, such as the Wood-Mizerïƒ' LT70/300, Baker 36 Series, LogMaster, Accu-Trac, S & W and vertical Amish mills. The blades beam strength and gullet depth combined with milled and induction hardened teeth allow them to out perform any other blade that is presently available today in both overall life & cutting speed.

* Our 2″ x .052 thick blade is specifically designed to cut grade lumber on high-production band resaws, such as the Brewco 800/1600/1800 and large band mills. This blade has exceeded our expectations and has given our customers both longer blade life and faster feed rates over the bi-metal blades commonly run on these saws.

* Our 1-1/4″ x .045 thick blade has become our most successful blade to date, running on small to medium size band mills and resaws. This blade for its size is more stable and will cut faster than any other blade on the market.

1″ x 3/4″ pitch x .042

This blade is specifically designed to cut grade hardwood on band resaws only. Expected production 5,000 + BF/Day (board feet per day) Available with .021 set per side.

1 1/4″ x 3/4″ pitch x .042 and .045

These blades run best at 5,300 S.F.P.M. on 18″ wheels or larger. Expected production is about 1,600 to 2,000 BF/Day. Available with .019(frozen), .021(resaw), .024(hardwood) and .029(softwood) set per side.

1 1/4″ x 7/8″ pitch x .042 and .045

These blades run best at 5,700 S.F.P.M. on 18″ wheels or larger. Expected production is about 1,800 to 2,200 BF/Day. Available with .019(frozen), .021(resaw & hardwood), .024(softwood) set per side.

1 3/8″ x .042 Cobalt

(8° Hook Angle) This blade is a special alloy used for extreme applications such as recycling telephone poles, recycling beams and cutting exotic hardwoods.

1 1/2″ x 7/8″ and 1″ pitch x .042

These blades run best at 5,700 S.F.P.M. on 18″ wheels or larger. Expected production is about 2,500 to 3,000 BF/Day. Available with .019(frozen), .021(resaw & hardwood), .024(softwood) set per side.

NEW BLADE – 1 1/2″ x 7/8″ pitch x .052

These blades run best at 5,700 to 6,300 S.F.P.M. on 18.75″ wheels or larger. Expected production is about 4,000 to 8,000 BF/Day. Available with .019 (frozen) and .026 (hardwood/softwood) set per side.

NEW BLADE – 1 1/2″ x 1″ pitch x .052

These blades run best at 5,700 to 6,300 S.F.P.M. on 18.75″ wheels or larger. Expected production is about 4,000 to 8,000 BF/Day. Available with .018 (frozen) and .023 (hardwood/softwood) set per side.

NEW BLADE – 1 3/4″ x 1″ pitch x .052

This blade runs best at 5,700 to 6,300 S.F.P.M. on 24″ wheels or larger. Expected production is about 6,000 to 10,000 BF/Day. Available with .023 (hardwood/softwood) set per side.

2″x 1″ pitch x .042

This blade runs best at 5,700 to 6,300 S.F.P.M. on 18″ wheels or larger. Expected production is about 2,500 to 3,000 BF/Day. Available with .021(hardwood/softwood) set per side.

2″x 1″ pitch x .052

These blades run best at 5,700 to 6,300 S.F.P.M. on 30″ wheels or larger. Expected production is about 8,000 to 25,000 BF/Day. Available with .018 (pallet/frozen) and .023 (resaw/hardwood) set per side.